Find lighting parts

Search by vehicle, bulb type, category, or SKU.

Results for flasher

48 products ready to review.

MP-1157-UB-DBL

MP-1157-UB-DBL 1960-1973 Double Rate Front Turn Lamps Kit

MP-1157-UB-DBL Kit comes with 2 lamps and includes new click flasher too. Lamps glow amber when activated. Fits all cars 1960 to 1973 and beyond. Housing and Lens not included. MP-1157-UB-DBL. Brand new from Mustang Project. These lamps solve that age old problem of slow flashing of the front turn signal lamps with rear sequential taillights. Front lamps flash at 2X the rate of the rear lamps. Our unique custom LED design and configuration pack more light power in an 1157 lamp that any other on the market by far. Use a clear lens for maximum impact. These LEDs are controlled by special circuitry to enable use on classic cars. Auto-parts store LEDs don't work and don't even compare in brightness. If you have an early 65 Mustang that utilizes the long Falcon style gauge set you will also need our part MP-FAL-TRN. Use your existing housing. Includes two(2) smart signal ultra-bright yellow LED lamps AND a new Mustang Project electronic click flasher. Compatible with Mustang Project rear LED sequential taillights so if you already have rear LED sequential taillights from Mustang Project upgrade to bright new double fast front LEDs.

$114.29Add

MP-8003-RD

MP-8003-RD 67/68 Mustang PAIR LED Kit

MP-8003-RD Two (2) Mirrors included, one for right and one for left included in kit. One electronic flasher module, connectors and mounting hardware included. Also available in Amber turn signal LED lighting. 67 68 Mustang Deluxe Remote Mirror Kit with LED indicators! Modern cars have LED indicators built into both mirrors. Classic cars and especially Mustangs have a lower profile than most modern cars. Make sure that your car is noticed when you change lanes with our new LED turn signal indicating mirrors. Mirrors look like stock 67 68 Mustang Deluxe Remote Mirror Kit with LED indicators! This safety feature helps prevent side collision accidents by giving cars in your blind spot plenty of warning if you need to change lanes. Special two way all glass mirror hides LEDs until activated. Mirrors look stock until you turn them on. . Superbly detailed to pass even the most critical inspection. Glass mirror is the "two-way" type with our patented electronics for reliable LED turn signal indicators. Super simple hook up in to existing turn signal wiring with NO special or complicated control boxes to worry about, Mustang Project's patented "Smart Signal" technology provides for retro-fit into vintage cars. NEW PRODUCT PLEASE ALLOW APPROXIMATELY 2-3 WEEKS FOR SHIPMENT

$499.20Add

MP-8002-RD-

MP-8002-RD-L Bullet PAIR Mirror LED Kit

MP-8002-RD Two (2) Mirrors included, one for right and one for left included in kit. One flasher module, connectors and mounting hardware included. Also available in Amber turn signal LED lighting. Two mirror Kit! Modern cars have LED indicators built into both mirrors. Classic cars and especially Mustangs have a lower profile than most modern cars. Make sure that your car is noticed when you change lanes with our new LED turn signal indicating mirrors. Mirrors look like stock Shelby bullet mirrors until the turn signals are activated. This safety feature helps prevent side collision accidents by giving cars in your blind spot plenty of warning if you need to change lanes. Special two way all glass mirror hides LEDs until activated. Mirrors look stock until you turn them on. Features An Extra Long Base To Cover Standard Mirror Mounting Holes. For the short base order MP-8002-RD-S Mustang or AC Cobra type cars all years. Superbly detailed to pass even the most critical inspection. Glass mirror is the "two-way" type with our patented electronics for reliable LED turn signal indicators. Super simple hook up in to existing turn signal wiring with NO special or complicated control boxes to worry about, Mustang Project's patented "Smart Signal" technology provides for retro-fit into vintage cars.

$470.03Add

MP-6007-DLX

MP-6007-DLX 64.5-66 Mustang Shelby Look LED Conversion Kit

MP-6007-DLX Included in your kit are two of our Patented LED Shelby Taillight panels, complete instructions and flasher module. Simply remove the old taillight housings, bezels, and lenses and replace with the new! This kit includes chrome molding around the lens edges for a factory finish. Convert the standard small 64-66 Mustang Taillights to SHELBY style in less than 1 hr. with no car modifications. Taillight panels pop in with no car damage and provide brilliant LED SEQUENTIAL taillight operation for a fraction of the cost of other methods with no car damage! No extra holes to drill at all! Super bright sequential LED operation and Shelby look! The bezel is a made with original Ford tooling with a fantastic chrome finish just like the original Shelbys. For the ultimate in an integrated molded in look buy the MP-6007-KIT which includes a custom fit fiberglass panel which can be painted to match or contrast your car! Available in 6 segment CHASE mode. Standard product is three segment sequential. Please email us if you desire the CHASE mode.

$863.89Add

MP-6004-UB

MP-6004-UB 1967-1968 LED Sequential Tail Light Kit

MP-6004-UB Included in your kit are 2) Taillight Modules ( right and left 115 LEDs each), 1) Flasher Module, and complete illustrated instructions. There is nothing else to buy nothing extra to install. Reuse your old lenses since these taillights run cooler than the standard incandescent bulb! NEW! Only from Mustang Project. 230 LEDs per kit more than any kit on the market! Features "Smart-Signal" patented technology and Mustang Project's exclusive "Batwing" design. If you demand the very best there is not a kit with more LED and brighter performance on the market. All with LED sequential operation! Up to 5X brighter than stock lamps! Exclusive "Smart Signal" technology prevents unwanted sequencing during braking and only Mustang Project has this patented feature. Installation is a snap. There is no need to add additional wires or the drill and modify the lamp housing. LEDs ( Light Emitting Diodes ) use less current than the standard Mustang incandescent bulbs relieving stress from your alternator. LEDs last longer and look brighter and redder! New white board design for greater reflectivity and light output that none can match! For a lower cost but still great LED kit that is 2X-3X brighter than ordinary lamps get our classic MP-6004 kit.

$215.93Add

MP-0005-UB

MP-0005-UB 64-66 LED Sequential Taillight Kit

MP-0005-UB Included in your kit are 2) Taillight Modules ( right and left 90 LEDs each), 1) Flasher Module, and complete illustrated instructions. There is nothing else to buy and nothing extra to install. Reuse your old lenses since these taillights run cooler than the standard incandescent bulb! NEW! Only from Mustang Project. 180 LEDs per kit! --- more than any kit on the market! Features "Smart-Signal" patented technology and Mustang Project's exclusive "Batwing" design. If you demand the very best - this is the kit - more LEDs and brighter performance than any on the Market plus LED sequential operation! Up to 5X brighter than stock lamps! Exclusive "Smart Signal" technology prevents unwanted sequencing during braking and only Mustang Project has this patented feature. Limited lifetime warranty too! Installation is a snap. There is no need to add additional wires or the drill and modify the lamp housing. LEDs ( Light Emitting Diodes ) use less current than the standard Mustang incandescent bulbs relieving stress from your alternator. LEDs last longer and look brighter and redder! New white substrate improves light output! For a lower cost but a great LED sequential kit that is 2X-3X brighter than ordinary lamps get our classic MP-0005 kit. NOTE: Flickering in video is caused by camera frame rate. Lights works solid and steady.

$215.93Add

MP-65-RIV-SEQ

MP-65-RIV-SEQ 65 Riviera LED Sequential Tail Light Kit

MP-65-RIV-SEQ Buick Riviera Super Bright LED Sequential chase feature taillights for your Riviera! Kit has 4 LED lamp modules with Click flasher too. Virtually any classic car with multiple brake/turn lights using 1157 lamp bases can have sequential taillights! Brighter and bolder plus the cool retro look of sequential taillights. Low current cool running operation! Great for custom and hot rods! LED modules replace existing 1157 incandescent lamps.

$313.76Add

MP-6008-BLK

MP-6008-BLK 68 Shelby Black Style Conversion Kit

MP-6008-BLK Your kit comes complete with two ( Left and Right ) taillight modules with black lenses and black bezels, 1 flasher module, and complete detailed and illustrated instructions for installation. Flat panel construction for LED light panel means no cutting your car! Order fiberglass panel separately part number FIB-0001. NEW! Now in Black on Black styling! Don't cut your car and reduce its value! No hole cutting required, no permanent car damage! Return your car to a stock look at any time. Convert from standard 67-68 Taillights to 68 Sequential Shelby style taillights. New black-out lenses with black bezels are perfect for that stealth restomod! Many customers have obtained the fiberglass adapter so this part is sold separately. If you have a 68 Shelby fiberglass adapter panel you do not need to purchase one from us. From old style to Shelby style with no permanent car modifications! Solid die cast and stainless steel construction. Looks Ford original! Super-bright LEDs will get you noticed. Easily removed and converted back to the stock taillights. Fits 67 and 68 Coupe, Fastback, and Convertible Mustangs.

$889.30Add

MP-8001-RD

MP-8001-RD PAIR LED Turn Signal Mirror Kit

MP-8001-RD INTRODUCTORY PRICING THIS MONTH ONLY. Two mirror Kit! Modern cars have LED indicators built into both mirrors. This safety feature helps prevent side collision accidents by giving cars in your blind spot plenty of warning if you need to change lanes. Special two way mirror hides LEDs until activated. Mirrors look stock until you turn them on. No holes or cut outs to mar the mirror surface either! Classic cars and especially Mustangs have a lower profile than most modern cars. Make sure that your car is noticed when you change lanes with our new LED turn signal indicating mirrors. Mirrors look like stock deluxe remote mirrors until the turn signal are activated. Simple 1 wire hook up, Mustang Project's patented "Smart Signal" technology provides for retro-fit into vintage cars. Kit includes two mirrors, one for right and one for left, and one electronic flasher module. Mirrors are remote style and can be installed with or without remote action. Normally ships 1-3 weeks after order.

$499.20Add

MP-CTL-MOD

MP-CTL-MOD Universal Sequencer Module

MP-CTL-MOD Kit comes complete with wiring diagram, 2) Control Modules, and 1) flasher module. Great for your hot rod! Universal sequencer for any type of lamps. Hook up to 3 lamps on each side of the car. Get true sequencing when turn signals are activated. All lamps come on during braking. Comes with flasher module. Just connect each module to your turn signal wire and connect up to three lamps of any type on each side of the car. Can be used with incandescent or LED lamps.

$127.00Add

MP-CLASSIC-4

MP-CLASSIC-4 Four LED Sequential Tail Light Kit

MP-CLASSIC-4 Kit includes four (4) 1157 LED lamps, plus CLICK flasher module and instructions. New brighter and easy to install LED modules. LED modules are no bigger than standard glass lamps and can fit directly into the access hole of almost any classic car! Super Bright LED Sequential taillights for almost any classic car with 1157 type taillight lamp bases! Virtually any classic car with multiple brake/turn lights using 1157 lamp bases can have sequential taillights! Brighter and bolder plus the cool retro look of sequential taillights! 4 Year warrant on materials and workmanship. Low current cool running operation! Great for custom and hot rods! LED modules replace existing 1157 incandescent lamps. -- Typical 6 lamp installation show in photo. Available in non-sequential models too!

$237.53Add

MP-HR-6-INCH-LED

MP-HR-6-INCH-LED 6 Inch Sequencing LED Light Bars Kit

MP-HR-6-INCH-LED Kit comes with two 6 inch light bars, a sequencer module, and wiring diagrams Great new product for your custom car or hot rod. These pair of 6 inch by .750 inch bars are covered with ultra bright LEDs and sequence in three segments. A flasher module is included so you can make your own CUSTOM tail light fixtures for your car, bike, or boat. Easy to install and all kits come with example wiring diagrams. Sequence in three segments and work just like a regular brake light lamp by becoming brighter when the brakes are applied. Use for a single brake/turn signal lamp just like you would use an 1157 lamp. Features our patented "Smart Signal" technology so that lamps do not sequence during normal braking.

$139.70Add

MP-HR-12-INCH-LED

MP-HR-12-INCH-LED 12 Inch Sequencing LED Light Bars Kit

MP-HR-12-INCH-LED Great new product for your custom car or hot rod. These pair of 12 inch by .750 inch bars are covered with ultra bright LEDs and sequence in six segments. A flasher module is included so you can make your own CUSTOM tail light fixtures for your car. Kit comes with two 6 inch light bars, a sequencer module, and wiring diagrams Great new product for your custom car or hot rod. These pair of 12 inch by .750 inch bars are covered with ultra bright LEDs and sequence in six segments. A flasher module is included so you can make your own CUSTOM tail light fixtures for your car, bike, or boat. Easy to install and all kits come with example wiring diagrams. Sequence in three segments and work just like a regular brake light lamp by becoming brighter when the brakes are applied. Use for a single brake/turn signal lamp just like you would use an 1157 lamp. Features our patented "Smart Signal" technology so that lamps do not sequence during normal braking.

$190.52Add

MP-71-JAV-SEQ

MP-71-JAV-SEQ Javelin LED Sequential Tail Light Kit

MP-71-JAV-SEQ Kit includes 4 ultra-bright microprocessor LEDs and electronic flasher with CLICK sound. Super Bright LED Sequential feature taillights for your Javelin! Virtually any classic car with multiple brake/turn lights using 1157 lamp bases can have sequential taillights. Brighter and bolder plus the cool retro look of sequential taillights! Lifetime warranty on materials and workmanship. Low current cool running operation. LED modules replace existing 1157 incandescent lamps.

$237.53Add

MP-5001

MP-5001 Falcon and Ranchero Non-Sunburst LED Tail Light Kit

MP-5001 For 64,65,66,67 Falcon and Ranchero. Ultra-bright LED taillights for the Falcon. Cool sunburst effect! LED modules to replace your existing incandescent lamps for far brighter and redder taillights. New LED modules are at least 3-4 times brighter than regular incandescent lamps. The LED modules are specially designed by Mustang Project to provide bright even illumination and to effectively utilize the existing Falcon reflector and lens. Works on Falcon tail lamps with or without back up lamps! Comes with unique Mustang Project double-sided ultra-bright LED modules, electronic flasher module, and complete instructions for an easy install. For cars with back up lamps see our other Falcon kits like the MP-5001-SB-BKUP

$288.70Add

MP-5001-BKUP-DLX

MP-5001-BKUP-DLX Falcon and Ranchero Deluxe LED Taillight Kit

MP-5001-BKUP-DLX For 64,65,66,67 Falcon and Ranchero. Comes with unique Mustang Project double sided ultra-bright LED modules, electronic flasher module, and complete instructions for an easy install. Price break through. Ultra bright LED taillights for the Falcon and Ranchero. LED modules replace your existing incandescent lamps for far brighter and redder taillights. The LED modules are especially designed by Mustang Project to provide bright even illumination and to effectively utilize the existing Falcon reflector and lens. Works on Falcon tail lamps with back up lamps!

$288.70Add

MP-6345-CRV-SEQ

MP-6345-CRV-SEQ 63-65 Corvette LED Sequential Tail Light Kit

MP-6345-CRV-SEQ Kit includes 4 ultra-bright microprocessor LEDs and electronic flasher with CLICK. Corvette Super Bright LED Sequential chase feature taillights for your Corvette! Kit has 4 LED lamp modules and flasher module. Now with Click flasher too. Virtually any classic car with multiple brake/turn lights using 1157 lamp bases can have sequential taillights! Brighter and bolder plus the cool retro look of sequential taillights! 4 Year warrant on materials and workmanship. Low current cool running operation! Great for custom and hot rods! LED modules replace existing 1157 incandescent lamps.

$237.53Add

MP-71-77-COMET

MP-71-77-COMET 71-77 Comet LED Tail Light Kit

MP-71-77-COMET Kit includes 2 ultra-bright patented LED lamp modules for brake turn lamps, two ultra bright white 1156 LED lamps for back-ups and electronic flasher with CLICK. LED Taillight Kit a Super Bright LED taillights for your Comet! Kit has 4 LED lamp modules and flasher module. Now with Click flasher too! Brighter and bolder. Limited lifetime warrant on materials and workmanship. Low current cool running operation! LED modules replace existing 1157 incandescent lamps.

$177.82Add

MP-71-77-COMET-DLX

MP-71-77-COMET-DLX 71-77 COMET Deluxe LED Tail Light Kit

MP-71-77-COMET-DLX Super Bright LED taillights for your Comet! Kit has 4 LED lamp modules and flasher module. Now with Click flasher too. Brighter and bolder. Limited lifetime warrant on materials and workmanship. Low current cool running operation! LED modules replace existing 1157 incandescent lamps. Kit includes 2 ultra-bright microprocessor LEDs modules for brake turn lamps, two ultra bright white 1156 LED lamps for back-ups and electronic flasher with CLICK.

$203.23Add

MP-6001-SUNB

MP-6001-SUNB 61-64 Galaxie Sunburst Ultra Bright LED Tail Light Kit

MP-6001-SUNB Galaxie Sunburst. Included in each kit are 2) LED modules and 1) electronic flasher module. Brand new from Mustang Project! Ultra bright LED taillights for the 61-64 Galaxie with Sunburst effect!! LED modules replace your existing incandescent lamps for far brighter and redder taillights. 5X brighter than standard lamps! New LED modules are at least 5 times brighter than regular incandescent lamps. Unique sunburst lighting effect during turn signaling. Lights lamp full bright during braking and "sunburst" during turn signal activation. Lights run dim when driving lights are on and go to full bright when brake is applied. No false turn signaling during braking like other kits! Everything you need to convert a car. Cars with back up-lamps can work with the back up socket or removed or order MP-6001-SUNB-BKU to convert your dim back up to LED operation! LED modules are 4.8 inches in diameter and will fit 61-64 cars.

$242.50Add

MP-6001-SUNB-BKUP

MP-6001-SUNB-BKUP Galaxie Sunburst with Back Up LED Tail Light Kit

MP-6001-SUNB-BKUP Galaxie Sunburst with back up lamps! Included in each kit are 2) LED modules and 1) electronic flasher Module and 2 1156 LED backup lamps. Galaxie Sunburst. Brand new from Mustang Project! Ultra bright LED taillights for the 61-64 Galaxie with Sunburst effect!! LED modules replace your existing incandescent lamps for far brighter and redder taillights. 5X brighter than standard lamps! New LED modules are at least 5 times brighter than regular incandescent lamps. Unique sunburst lighting effect during turn signaling. Lights lamp full bright during braking and "sunburst" during turn signal activation. Lights run dim when driving lights are on and go to full bright when brake is applied. No false turn signaling during braking like other kits! Everything you need to convert a car. LED modules are 4.8 inches in diameter and will fit 61-64 cars.

$346.45Add

MP-63-IMP-SEQ-3

MP-63-IMP-SEQ-3 1963 Impala LED Sequential Tail light Kit

MP-63-IMP-SEQ-3 LED Sequential Tail light Kit for 63 Impala. Easily converts your 63 Impala to cool LED sequential operation. Simple install, super bright LED modules! Kit includes 6 LED ultra-bright lamps, two 1157 sockets LED lamps for middle back up lamp LED conversion and the electronic click flasher. Easily converts your 63 Impala to cool LED sequential operation. No complex wiring boxes. Just plug in the ultra-high power LED lamps, install new sockets for the middle lamp and plug in the patented electronic click flasher. Use your existing housings and lenses no need to replace! Complete instructions included.

$317.57Add

MP-63-IMP-SEQ-BKUP

MP-63-IMP-SEQ-BKUP 1963 Impala LED Sequential Tail Light with Back Up Kit

MP-63-IMP-SEQ LED Sequential Tail light Kit for 63 Impala. Easily converts your 63 Impala to cool LED sequential operation. Simple install, super bright LED modules! Kit includes 4 LED ultra-bright lamps, two 1156 LED lamps for middle back up lamp LED conversion and the electronic click flasher. Easily converts your 63 Impala to cool LED sequential operation. No complex wiring boxes. Just plug in the ultra-high power LED lamps, install new sockets for the middle lamp and plug in the patented electronic click flasher. Use your existing housings and lenses no need to replace! Complete instructions included.

$317.57Add

MP-66-RIV-SEQ

MP-66-RIV-SEQ 66 Riviera LED Sequential Taillight Kit

MP-66-RIV-SEQ Buick Riviera Super Bright LED Sequential taillights for almost any classic car with 1157 type taillight lamp bases! Kit has 6 LED lamp modules and flasher module. Now with Click flasher too. Kit includes 6 ultra-bright microprocessor LEDs and electronic flasher with CLICK. New brighter and easy to install LED modules for the Buick Riviera. LED modules are no bigger than standard glass lamps and can fit directly into the access hole of almost any classic car! Super Bright LED Sequential taillights for almost any classic car with 1157 type taillight lamp bases. Brighter and bolder plus the cool retro look of sequential taillights! Limited warranty on materials and workmanship. Low current cool running operation! LED modules replace existing 1157 incandescent lamps. .

$383.76Add

MP-67-RIV-SEQ

MP-67-RIV-SEQ 67 Riviera LED Sequential Taillight Kit

MP-67-RIV-SEQ Buick Riviera Super Bright LED Sequential taillights for almost any classic car with 1157 type taillight lamp bases! Kit has 6 LED lamp modules, 2 additional pre-wired sockets, and flasher module. Now with Click flasher too. Kit includes 6 ultra-bright microprocessor LEDs and electronic flasher with CLICK LED modules are no bigger than standard glass lamps and can fit directly into the access hole of almost any classic car! Super Bright LED Sequential taillights for almost any classic car with 1157 type taillight lamp bases! Virtually any classic car with multiple brake/turn lights using 1157 lamp bases can have sequential taillights! Brighter and bolder plus the cool retro look of sequential taillights! 1 Year warranty on materials and workmanship. Low current cool running operation! Great for custom and hot rods! LED modules replace existing 1157 incandescent lamps.

$415.52Add

MP-50001

MP-50001 1969 Camaro LED Sequential Tail Light Kit

MP-50001 1969 Camaro Sequential LED Tail Lights - Convert your dim incandescent bulbs to brighter LEDs that never burn out and are 2-3 times brighter and more reliable than incandescent lights! Comes with four LED lamps and flasher module Featuring the exclusive Mustang Project "SMART-SIGNAL" technology these kits are the ONLY kits on the market today which prevent sequencing during braking -- which is illegal in some areas. Simply stated when the turn signals are on the tail lights sequence -- Otherwise they don't! All lights come on full bright during braking. New optical designs utilize specialized LEDs with unique coverage patterns for a better brighter look. Get full coverage with a retro-classic look that is authentic. P/N MP-50001. Complete kit! Everything you need included nothing else to buy! Use your existing taillight housings, lens, and all components! Simple install! Complete installation instructions included! LED light sources last virtually forever! Appears 2-3X brighter than standard bulbs! Undetectable invisible installation, your car will look concours stock! Included in your kit are 4) Taillight Modules ( 2 right and 2 left ) and 1) Flasher Module, Complete illustrated instructions. There is nothing else to buy nothing extra to install. Reuse your old lenses since these taillights run cooler than the standard incandescent bulb! Installation is a snap. There is no need to add additional wires or the drill and modify the lamp housing. LEDs ( Light Emitting Diodes ) use less current than the standard Mustang incandescent bulbs relieving stress from your alternator. LEDs last longer and look brighter and redder! Use your existing lenses and wiring! No extra components to buy! The entire installation can be done with a single screwdriver! Kit comes standard with CLICK flasher!

$215.93Add

MP-50002

MP-50002 1967-68 Camaro LED Sequential Tail Light Kit

MP-50002 1967-68 Camaro Sequential LED Tail Lights - Convert your dim incandescent bulbs to brighter LEDs that never burn out and are 2-3 times brighter and more reliable than incandescent lights! Comes with four LED lamps and flasher module. Complete kit! Everything you need included nothing else to buy! Featuring the exclusive Mustang Project "SMART-SIGNAL" technology these kits are the ONLY kits on the market today which prevent sequencing during braking -- which is illegal in some areas. Simply stated when the turn signals are on the tail lights sequence -- Otherwise they don't! All lights come on full bright during braking. New optical designs utilize specialized LEDs with unique coverage patterns for a better brighter look. Get full coverage with a retro-classic look that is authentic. Use your existing taillight housings, lens, and all components! Simple install! Complete installation instructions included! LED light sources last virtually forever! Appears 2-3X brighter than standard bulbs! Undetectable invisible installation, your car will look concours stock! Included in your kit are 4) Taillight Modules ( 2 right and 2 left ) and 1) Flasher Module, Complete illustrated instructions. There is nothing else to buy nothing extra to install. Reuse your old lenses since these taillights run cooler than the standard incandescent bulb! Installation is a snap. There is no need to add additional wires or the drill and modify the lamp housing. LEDs ( Light Emitting Diodes ) use less current than the standard Mustang incandescent bulbs relieving stress from your alternator. LEDs last longer and look brighter and redder! Use your existing lenses and wiring! No extra components to buy! The entire installation can be done with a single screwdriver! Kit comes standard with CLICK flasher!

$215.93Add

MP-CAM-69-RS

MP-CAM-69-RS 1969 Camaro RS LED Sequential Tail Light Kit

MP-69-CAM-RS 1969 Camaro Sequential LED Tail Lights 3 segment per side - Convert your dim incandescent bulbs to brighter LEDs that never burn out and are 2-3 times brighter and more reliable than incandescent lights! Limited time intro. price! Included in your kit are 6) Taillight Modules ( 3right and 3 left ) and 1) Flasher Module, Comes with extra 1157 socket for the middle section of your tail light. Complete illustrated instructions. There is nothing else to buy nothing extra to install. Reuse your old lenses since these taillights run cooler than the standard incandescent bulb. The entire installation can be done with a single screwdriver! Featuring the exclusive Mustang Project "SMART-SIGNAL" technology these kits are the ONLY kits on the market today which prevent sequencing during braking . Simply stated- when the turn signals are on the tail lights sequence -- Otherwise they don't! All lights come on full bright during braking. New optical designs utilize specialized LEDs with unique coverage patterns for a better, brighter look. Get full coverage with a retro-classic look that is authentic. Middle section is illuminated with LED. Can be used with cars that have back up lamps if you change to the RS lens type. Middle socket is even included in the kit. LED conversions are simple to install with no modification what so ever and you can utilize the original bayonet style socket assembly housing and lenses. LEDS are very efficient, and are rated to last 100.000 hours. Complete kit! Everything you need included nothing else to buy! Use your existing taillight housings, lens, and all components! Simple install! Complete installation instructions included! LED light sources last virtually forever! Appears 2-3X brighter than standard bulbs! Undetectable invisible installation, your car will look Concours stock! Installation is a snap. LEDs ( Light Emitting Diodes ) use less current than the standard Mustang incandescent bulbs relieving stress from your alternator. LEDs last longer and look brighter and redder! Kit comes standard with CLICK flasher! NEW PRODUCT ALLOW TWO WEEKS FOR SHIPMENT DUE TO LARGE DEMAND

$241.34Add

MP-66-GTO-SEQ

MP-66-GTO-SEQ 1966 Pontiac GTO Super Bright LED Sequential Tail Light Kit

MP-66-GTO-SEQ Pontiac GTO Super Bright LED Sequential taillights for almost any classic car with 1157 type taillight lamp bases! Kit has 6 LED lamp modules and flasher module. Now with Click flasher too. Kit includes 6 ultra-bright microprocessor LEDs and electronic flasher with CLICK. New brighter and easy to install LED modules. LED modules are no bigger than standard glass lamps and can fit directly into the access hole of almost any classic car! Super Bright LED Sequential taillights for almost any classic car with 1157 type taillight lamp bases! Virtually any classic car with multiple brake/turn lights using 1157 lamp bases can have sequential taillights! Brighter and bolder plus the cool retro look of sequential taillights! Low current cool running operation! Great for custom and hot rods! LED modules replace existing 1157 incandescent lamps.

$237.53Add

MP-67-GTO-SEQ

MP-67-GTO-SEQ 1967 Pontiac GTO Super Bright LED Sequential Tail Light Kit

MP-67-GTO-SEQ Pontiac GTO Super Bright LED Sequential taillights! Kit has 4 LED lamp modules and flasher module. Now with Click flasher too! Kit includes 4 ultra-bright microprocessor LEDs and electronic flasher with CLICK. New brighter and easy to install LED modules. LED modules are no bigger than standard glass lamps and can fit directly into the access hole of almost any classic car! Super Bright LED Sequential taillights for almost any classic car with 1157 type taillight lamp bases! Virtually any classic car with multiple brake/turn lights using 1157 lamp bases can have sequential taillights! Brighter and bolder plus the cool retro look of sequential taillights! Low current cool running operation! LED modules replace existing 1157 incandescent lamps.

$190.52Add

MP-69-GTO-SEQ

MP-69-GTO-SEQ 1969 Pontiac GTO LED Sequential Tail Light Kit

MP-69-GTO-SEQ Pontiac GTO Super Bright LED Sequential taillights! Kit has 4 LED lamp modules and flasher module. Now with Click flasher too! Kit includes 4 ultra-bright microprocessor LEDs and electronic flasher with CLICK. New brighter and easy to install LED modules. LED modules are no bigger than standard glass lamps and can fit directly into the access hole of almost any classic car! Super Bright LED Sequential taillights for almost any classic car with 1157 type taillight lamp bases! Virtually any classic car with multiple brake/turn lights using 1157 lamp bases can have sequential taillights! Brighter and bolder plus the cool retro look of sequential taillights! Lifetime warranty on materials and workmanship. Low current cool running operation! LED modules replace existing 1157 incandescent lamps.

$190.52Add

MP-FB-778-SEQ-DLX

MP-FB-778-SEQ-DLX 74-78 Firebird Sequential LED Tail Light Kit

MP-FB-778-SEQ-DLX 74-78 Firebird Sequential LED Tail Lights 3 segment per side - Convert your dim incandescent bulbs to brighter LEDs that never burn out and are 2-3 times brighter and more reliable than incandescent lights! Complete kit! Everything you need included nothing else to buy! Included in kit are 6 LED Smart Signal Lamps, Smart Signal Electronic Flasher, two 1157 sockets for conversion of outer lamp and instructions. 74-78 Firebird Featuring the exclusive Mustang Project "SMART-SIGNAL" technology these kits are the ONLY kits on the market today which prevent sequencing during braking . Simply stated when the turn signals are on the tail lights sequence -- Otherwise they don't! All lights come on full bright during braking. New optical designs utilize specialized LEDs with unique coverage patterns for a better brighter look. Get full coverage with a retro-classic look that is authentic. Outer socket is even included in the kit. LED conversions are simple to install with no modification what so ever and you can utilize the original bayonet style socket assembly housing and lenses. LEDS are very efficient, and are rated to last 100.000 hours. Use your existing taillight housings, lens, and all components! LED light sources last virtually forever! Appears 2-3X brighter than standard bulbs! Undetectable invisible installation, your car will look concours stock! Installation is a snap. LEDs ( Light Emitting Diodes ) use less current than the standard Mustang incandescent bulbs relieving stress from your alternator. LEDs last longer and look brighter and redder! Use your existing lenses and wiring! No extra components to buy. The entire installation can be done with a single screwdriver! Kit comes standard with CLICK flasher! NEW PRODUCT ALLOW TWO WEEKS FOR SHIPMENT DUE TO LARGE DEMAND

$165.11Add

MP-10101

MP-10101 1970 Torino LED Sequential Taillight Kit

MP-10101 Kit comes with 2 LED boards and flasher module NEW Product from MUSTANG PROJECT: LED SEQUENTIAL Taillights for the classic Torino. Get that cool sequential flashing effect that Shelby and Cougar owners enjoy. Unlike all other products on the market our "Patent Applied for" technology allows these taillight lamp kits to work properly during braking. When the brake is hit all sections illuminate at full brightness -- no unintended sequencing during simple braking. However, when the turn signal is activated they flash sequentially. Installation is a snap. There is no need to add additional wires or a drill and modify the lamp housing. Use your existing lenses and wiring! LEDs ( Light Emitting Diodes ) use less current than the standard Mustang incandescent bulbs relieving stress from your alternator. LEDs last longer and look brighter and redder!

$223.56Add

MP-7001

MP-7001 67-68 Cougar LED Sequential Tail Light Kit

MP-7001 NEW DESIGN! No need to remove lens or bezel. No need to remove lens or bezel. LED Sequential Tail Lights for the 67-68 Cougar – featuring the patented “SmartSignal” feature exclusively from Mustang Project. LED lamps with integrated microprocessor fits right in housing openings. Kit comes complete with trunk installed flasher control modules, 6 LED lamps, and complete instructions. Featuring the patented “SmartSignal” feature exclusively from Mustang Project. LED lamps with integrated microprocessors fit right in housing openings so that there is no need to take the lens, housing, and lamps apart! Only Mustang Project LED sequential tail lights prevent unwanted sequencing during braking. Don’t confuse drivers behind you -- get “SmartSignal”! You will replace your existing electro mechanical components with our new electronic modules and you will replace the incandescent lamps with new ultra bright LED modules. The included LED modules simply replace your old incandescent lights to provide 100% reliable sequencing when the turn signal is activated just like the original Cougar only far brighter and redder with the proven reliability of LEDs ( Light Emitting Diodes ). Limited Lifetime Warranty

$355.69Add

MP-7001-70

MP-7001-70 69-70 Cougar and Shelby LED Kit

MP-7001-70 Kit comes complete with under dash installed flasher control modules, 6 LED lamps, and complete instructions. New exclusively from Mustang Project. LED Sequential Tail Lights for the 69 70 Cougar and 69 70 Shelby – featuring the patented “SmartSignal” feature exclusively from Mustang Project. Don’t confuse drivers behind you -- get “SmartSignal”! The included LED modules simply replace your old incandescent lights to provide 100% reliable sequencing when the turn signal is activated just like the original Cougar only far brighter and redder with the proven reliability of LEDs ( Light Emitting Diodes ).

$355.69Add

MP-1999-LED-QK

MP-1999-LED-QK 1999 COBRA LED Sequential Tail Light Kit

MP-1999-LED-QK All connectors, instructions, and LED modules for BOTH sides are provided. NEW! Exclusively at Mustang Project! Another Mustang Project breakthrough. The worlds ONLY sequential taillight kit for the 1999 Mustang Cobras with yellow turn signal lamp! This kit is unique on the market because the BRAKE lights work properly! The taillights only sequence when the turn signal is activated. Brakes come full on when braking! Only Mustang Project has this patent pending feature on select models. Yellow lamp blinks followed in sequence by three red lamps during turn signals. All three red lamps come on bright during braking and dim if driving lights are turned on. No wire cutting and no harness change out. No permanent modifications to you car at all. Replace your flasher module with our patented electronic module and just pop in the LED modules in place of your incandescent lamps and go! Mustang Project produces the only sequential LED lamp kit that does not require permanent modifications to your existing wiring harness. LEDs (Light Emitting Diodes) last forever, are redder, and produce a clearer light than incandescent lamps.

$392.65Add

MP-2004-LED-QK

MP-2004-LED-QK 1996-2004 Mustang LED Sequential Tail Light Kit

MP-2004-LED-QK Kit comes with six (6) LED lamps and one flasher module Quick connect flasher module for even easier installation. NEW!! Exclusively at Mustang Project! Another Mustang Project break-through. The first LED sequential taillight kit on the market for 1996-2004 Mustangs. This kit is unique on the market in that the BRAKE lights work properly! That is the taillights only sequence when the turn signal is activated. Brakes come full on when braking! Only Mustang Project has this patent pending feature on select models. No wire cutting and no harness change out. No permanent modifications to you car at all. Replace your flasher module with our patented electronic module and just pop in the LED modules in place of your incandescent lamps and go! All connectors, instructions, and LED modules for BOTH sides are provided. Mustang Project produces the only sequential LED lamp kit that does not require permanent modifications to your existing wiring harness. LEDs (Light Emitting Diodes) last forever, are redder and produce a clearer light than incandescent lamps.

$346.45Add

MP-FLA-QK

MP-FLA-QK Late Model Mustang Extra Flasher Module

MP-FLA-QK 1988-2004 Electronic flasher module Includes one (1) flasher module Buy an extra electronic flasher module for your emergency(4 way flashers ). Makes sequential tail lighting flash sequentially on both sides. Great for car shows. Also needed when converting standard incandescent front parking/turn lamps into LED usage!

$50.77Add

MP-6677-LED-BRC-KIT

MP-6677-LED-BRC-KIT 66-77 Bronco Exterior Brake LED Lamp Kit

MP-6677-LED-BRC-KIT Included in your kit are 2) Front "Smart Signal" LED RFB Lamps, 2) Rear "Smart Signal" LED RFB Brake/Turn Lamps, 4) LED side marker lamps( 2 red, 2 amber), 2) Back up lamps 1156 type, 2) License plate lamps BA15D low profile type, and electronic flasher. LED lamps for your exterior brake, parking, turn, back up and license plate lighting! The new exterior lighting kit is really great. It includes all of the LEDs needed for 66-77 BRONCOs to go totally LED including the front turn, rear brake/turn, parking, license plate lamps, and the back-up lamps. Every lamp except the headlights! Our new RFB lamps with Smart Signal technology are included for the turn and brake lamps as well. The kit even includes an electronic flasher so the customer has literally nothing else to buy.

$190.52Add

MP-6677-LED-BRC-KIT-DLX

MP-6677-LED-BRC-KIT-DLX 66-77 Bronco Deluxe Exterior Brake LED Lamp Kit

MP-6677-LED-BRC-KIT-DLX Included in your kit are 2) Front "Smart Signal" LED RFB Lamps, 2) Rear "Smart Signal" LED RFB Brake/Turn Board Modules, 4 LED side marker lamps( 2 red, 2 amber), 2) Back up lamps 1156 type, 2) License plate lamps BA15D low profile type, and electronic flasher. Deluxe ultra-bright kit. LED lamps for your exterior brake, parking, turn, back up and license plate lighting! The new exterior lighting kit is really great. It includes all of the LEDs needed for 66-77 BRONCOs to go totally LED including the front turn, rear brake/turn, parking, license plate lamps, and the back-up lamps. Every lamp except the headlights! Our new RFB lamps with Smart Signal technology are included for the turn and brake lamps as well. The kit even includes an electronic flasher so the customer has literally nothing else to buy.

$241.34Add

MP-6466-THB

MP-6466-THB Thunderbird Deluxe Ultra Bright LED Sequential Kit

MP-6466-THB Deluxe Ultra Bright kit! Fits the 64 Thunderbird. Kit includes 6 LED modules, MP-FLA-CLICK flasher module, and complete wiring instructions and hardware. LED Sequential Kit brighter more reliable LED sequential operation. Our new design integrates the microprocessor right in the lamp base itself. Fits in existing lamp socket hole just like the original lamp. Convert your old incandescent lamps and broken sequential units to brighter more reliable LED operation. The kit is ideally suited for a conversion from standard incandescent lamps to LED sequential operation using your original Thunderbird taillight housings and lenses. Simply replace your incandescent lamps with our LED modules install the new flasher module under the dash and go! NEW design no lens removal required!.

$215.93Add

MP-0005-KIT

MP-0005-KIT 64-66 Sequential LED Tail Light Kit

MP-0005-KIT 64-66 Sequential LED Tail Lights - Convert your dim incandescent bulbs to brighter LEDs Complete Kit with LED modules, housings, bezels, and lenses. Utilizing our patent pending technology the 1964-73 Mustang sequential LED kits are the ONLY kits on the market today which prevent sequencing during braking -- which is illegal in some areas. Simply stated when the turn signals are on the tail lights sequence -- Otherwise they don't! All lights come on full bright during braking. New optical designs utilize specialized LEDs with unique coverage patterns for a better brighter look. Get full coverage with a retro-classic look that is authentic. Read here to see why our optical designs are better! No unintended sequencing during simple braking. However, when the turn signal is activated they flash sequentially! Complete kit! Everything you need included nothing else to buy! Use your existing taillight housings, lens, and all components! Cool running LEDs won't melt your lenses like 3 bulb incandescent kits! Simple 10 min. install! Complete installation instructions included! LED light sources last virtually forever! Appears 2-3X brighter than standard bulbs! Lowest cost on the market today! Convert back to standard bulbs in minutes. Undetectable invisible installation, your car will look concours stock! Included in your kit are Mounting Hardware, 2) Housings, 2) Lenses, Gaskets, 2) LED Taillight Modules (standard brightness: right and left ), 1) Click Flasher Module, Complete illustrated instructions. There is nothing else to buy nothing extra to install. Reuse your old lenses since these taillights run cooler than the standard incandescent bulb! Installation is a snap. There is no need to add additional wires or the drill and modify the lamp housing. LEDs ( Light Emitting Diodes ) use less current than the standard Mustang incandescent bulbs relieving stress from your alternator. LEDs last longer and look brighter and redder! Use your existing lenses and wiring! No extra components to buy! The entire installation can be done with a single screwdriver!

$304.85Add

MP-0005-UB-KIT

MP-0005-UB-KIT 64-66 Ultra Bright Sequential LED Tail Light Modules with Rebuild Kit

MP-0005-KIT-UB This complete tail light housing rebuild kit has our brightest 180 LED sequential kit! - Convert your dim incandescent bulbs to brighter LEDs. Complete Kit with LED modules, housings, bezels, and lenses. Utilizing our patent pending technology the 1964-73 Mustang sequential LED kits are the ONLY kits on the market today which prevent sequencing during braking -- which is illegal in some areas. Simply stated when the turn signals are on the tail lights sequence -- Otherwise they don't! All lights come on full bright during braking. New optical designs utilize specialized LEDs with unique coverage patterns for a better brighter look. Get full coverage with a retro-classic look that is authentic. Read here to see why our optical designs are better! No unintended sequencing during simple braking. However, when the turn signal is activated they flash sequentially! Complete kit! Everything you need included nothing else to buy! Use your existing taillight housings, lens, and all components! Cool running LEDs won't melt your lenses like 3 bulb incandescent kits! Simple 10 min. install! Complete installation instructions included! LED light sources last virtually forever! Appears up to 5X brighter than standard bulbs! Lowest cost on the market today! 180 Industrial grade LEDs! Convert back to standard bulbs in minutes. Undetectable invisible installation, your car will look concours stock! Included in your kit are Mounting Hardware, 2) Housings, 2) Lenses, Gaskets, 2) LED Taillight Modules (standard brightness: right and left ), 1) Click Flasher Module, Complete illustrated instructions. There is nothing else to buy nothing extra to install. Reuse your old lenses since these taillights run cooler than the standard incandescent bulb! Installation is a snap. There is no need to add additional wires or the drill and modify the lamp housing. LEDs ( Light Emitting Diodes ) use less current than the standard Mustang incandescent bulbs relieving stress from your alternator. LEDs last longer and look brighter and redder! Use your existing lenses and wiring! No extra components to buy! The entire installation can be done with a single screwdriver!

$369.55Add

MP-0005-UB-NON

MP-0005-UB-NON 64.5-66 180 NON Sequential LED Kit

MP-0005-UB-NON Included in your kit are 2) Taillight Modules ( right and left 90 LEDs each), 1) Flasher Module, and complete illustrated instructions. There is nothing else to buy nothing extra to install. Reuse your old lenses since these taillights run cooler than the standard incandescent bulb! NEW! NON Sequential LED Kit for the 64.5-66 180 LEDs per kit! --- more than any kit on the market! Features "Smart-Signal" patented technology and Mustang Project's exclusive "Batwing" design. If you demand the very best - this is the kit - more LED sand brighter performance than any on the Market plus LED operation! Up to 5X brighter than stock lamps! Exclusive "Smart Signal" technology prevents unwanted sequencing during braking and only Mustang Project has this patented feature. Lifetime limited warranty too! Installation is a snap. There is no need to add additional wires or the drill and modify the lamp housing. LEDs ( Light Emitting Diodes ) use less current than the standard Mustang incandescent bulbs relieving stress from your alternator. LEDs last longer and look brighter and redder! For a lower cost but a great LED sequential kit that is 2X-3X brighter than ordinary lamps get our classic MP-0005 kit.

$177.82Add

MP-6008-FRST

MP-6008-FRST 68 Shelby Style Sequential Tail Light Conversion Kit

MP-6008-FRST NEW! Now in Clear Frost styling! Don't cut your car and reduce its value! No hole cutting required, no permanent car damage! Return your car to a stock look at any time. Convert from standard 67-68 Taillights to 68 Sequential Shelby style taillights. New Clear Frost lenses with chrome bezels are perfect for that restomod! Many customers have obtained the fiberglass adapter so this part is sold separately. If you have a 68 Shelby fiberglass adapter panel you do not need to purchase one from us. From old style to Shelby style with no permanent car modifications! Solid die cast and stainless steel construction. Looks Ford original! Super-bright LEDs will get you noticed. Easily removed and converted back to the stock taillights. Your kit comes complete with two ( Left and Right ) taillight modules with frost lenses and chrome bezels, 1 flasher module, and complete detailed and illustrated instructions for installation. Flat panel construction for LED light panel means No cutting your car! Order fiberglass panel separately part number FIB-0001 . Fits 67 and 68 Coupe, Fastback, and Convertible Mustangs.

$889.30Add

MP-6008-SLVR

MP-6008-SLVR 68 Shelby Style Sequential Tail Light Conversion Kit

MP-6008-SLVR NEW! Your kit comes complete with two ( Left and Right ) taillight modules with chrome lenses coatings, and chrome bezels, 1 flasher module, and complete detailed and illustrated instructions for installation. Now silver reflective lens styling! Don't cut your car and reduce its value! No hole cutting required, no permanent car damage! Return your car to a stock look at any time. Convert from standard 67-68 Taillights to 68 Sequential Shelby style taillights. New silver reflective coating inside the lens along with the chrome bezels are perfect for that restomod! Many customers have obtained the fiberglass adapter so this part is sold separately. If you have a 68 Shelby fiberglass adapter panel you do not need to purchase one from us. From old style to Shelby style with no permanent car modifications! Solid die cast and stainless steel construction. Looks Ford original! Super-bright LEDs will get you noticed. Easily removed and converted back to the stock taillights. Flat panel construction for LED light panel means No cutting your car! Order fiberglass panel separately part number FIB-0001 . Fits 67 and 68 Coupe, Fastback, and Convertible Mustangs.

$889.30Add

MP-6002

MP-6002 67 Shelby Style Taillight Conversion Kit

MP-6002 From old style to Shelby style with no permanent car modifications! Left and right LED panels, flasher module, and complete instructions with mounting hardware. Fiberglass panel sold separately ORDER: FIB-0002 Shelby Light Panel Kit. Go from old to new in less than 1 hour. Full sequential operation. No repainting. Solid die cast and stainless steel construction. Looks Ford original! Super-bright LEDs will get you noticed. Easily removed and converted back to the stock taillights. Your kit comes complete with two ( Left and Right ) taillight modules, 1 flasher module, and complete detailed and illustrated instructions for installation. Flat panel construction for LED light panel means No cutting your car! You need two major components to install this kit. The fiberglass adapter panel (FIB-0002) AND our LED Sequential Light Panels. Many customers have obtained the fiberglass adapter so this part is sold separately. If you have a 67 Shelby fiberglass adapter panel similar to FIB-0002 you do not need to purchase one from us!

$863.89Add

MP-6002-CHASE

MP-6002-CHASE 67 Shelby Style Taillight Conversion Kit

MP-6002-CHASE From old style to Shelby style with no permanent car modifications! Same kit as our MP-6002 kit with chase lighting function! Shelby Light Panel Kit: ( Left and right LED panels, flasher module, and complete instructions with mounting hardware ). Go from old to new in less than 1 hour. Full sequential operation. No repainting. Solid die cast and stainless steel construction. Looks Ford original! Super-bright LEDs will get you noticed. Easily removed and converted back to the stock taillights. Your kit comes complete with two ( Left and Right ) taillight modules, 1 flasher module, and complete detailed and illustrated instructions for installation. Flat panel construction for LED light panel means No cutting your car! (Fiberglass panel sold separately ORDER: FIB-0002). You need two major components to install this kit. The fiberglass adapter panel (FIB-0002) AND our LED Sequential Light Panels. Many customers have obtained the fiberglass adapter so this part is sold separately. If you have a 67 Shelby fiberglass adapter panel similar to FIB-0002 you do not need to purchase one from us!

$863.89Add